SERIES REVERSE OSMOSIS SYSTEMS

150 m3 / day to 1650 m3 / day,
Reverse Osmosis is the membrane filtration process for obtaining pure water, which separates all unwanted minerals from water, applied to waters where conventional treatment systems are insufficient (seawater, water with high conductivity, well waters, etc.). This process continues until osmotic equilibrium is achieved. Reverse osmosis is the reversal of this osmotic flow. Aquark gama reverse Osmosis Systems successfully ensures that pure water is obtained as a result of this process. In addition, Aquarkgama Reverse Osmosis Systems can be produced in different design styles according to customer requests.

STANDARD FEATURES

• Membrane Vessels FRP
  
• TFC Spiral wound membranes 8 “diameter
• AISI304 or AISI316 stainless steel vertical centrifugal high pressure pump
• ST-37 Epoxy painted carbon steel or AISI304 Stainless Steel Skid
• 5 Micron precision cartridge filter
• Low pressure line U-PVC PN16
• High pressure line AISI304 Stainless steel
• Inlet electric actuated butterfly valve
• Pressure regulating globe valves at pump outlet and wastewater line
• Low and high pressure switch
• Product water and waste water flow meters
• Glycerine manometers
• Product water conductivity indicator (0-2000µS / cm)
• Product water pH meter (optional)
• Autoflush, automatic rinsing and chemical washing system
• On-Off switch
• PLC and operator panel
• 380 V / 50Hz / 3ph
• IP56 control panel

Recommended Inflow Water Limits

• Inlet water TDS: 0 – 2,000 ppm
• Working pressure: between 10 and 15 bar
• Inlet water pressure: 2 to 5 bar
• If hardness is more than 3 French ASC dosage required.
• pH range: 6 – 8
• Silica (SiO2) Tolerance: 25 ppm max. @ 60% efficiency
• Max. Inlet water temperature = 30º C Max.
• Max Iron (Fe) tolerance: 0.05 ppm, if ASC is dosed 0.2 ppm
• Hydrogen Sulfide should not be.
• There should be no turbidity (NTU<1)
• SDI < 5
• Microbiological contamination should be removed